Model Parameter Extraction Tool for the Analysis Series-Connected SiC-MOSFETs
Generated SiC-MOSFETs models are employed to perform simulation of switches made of two series-connected devices.
Measuring small differential-mode voltages with high common-mode voltages and fast transients – Application to gate drivers for wide band-gap switches
In power electronics, gate-voltage measurement is used to optimize the design of the gate driver.
Measuring small differential-mode voltages with high common-mode voltages and fast transients – Application to gate drivers for wide band-gap switches
In power electronics, gate-voltage measurement is used to optimize the design of the gate driver.
IGBT Lifetime Estimation in a Modular Multilevel Converter for bidirectional point-to-point HVDC application
This paper deals with the lifetime estimation of one modular multilevel converter submodule in a bidirectional point-to-point HVDC application.
IGBT Lifetime Estimation in a Modular Multilevel Converter for bidirectional point-to-point HVDC application
This paper deals with the lifetime estimation of one modular multilevel converter submodule in a bidirectional point-to-point HVDC application.
Lagrangian model of an isolated dc-dc converter with a 3-phase medium frequency transformer accounting magnetic cross saturation
This article presents a nonlinear equivalent circuit model of an isolated dc-dc converter with a 3-phase medium frequency transformer.
Lagrangian model of an isolated dc-dc converter with a 3-phase medium frequency transformer accounting magnetic cross saturation
This article presents a nonlinear equivalent circuit model of an isolated dc-dc converter with a 3-phase medium frequency transformer.
Effective Permeability of Multi Air Gap Ferrite Core 3-Phase Medium Frequency Transformer in Isolated DC-DC Converters
This article presents the measurements of the equivalent B(H) and the equivalent magnetic permeability of two three-phase MFT prototypes.
Phd Majed Eddine MOUSTAID “Experimental development of a thermosiphon loop for thermal regulation of power electronic devices”
The work of this thesis focuses on the experimental development of a passive and biphasic cooling system to cool down power electronics. Some of those modules are mean voltage power converters developed by Supergrid Institute. Some constraints have been imposed upstream to this project. While some limitations are of the technological nature, other constraints are related mainly to the environmental and biological aspects. The first part of this thesis was to find a suitable cooling system that could be adapted to the project specifications. After some research, we decided to build a loop thermosiphon filled with NOVEC 649.
SuperGrid Institute has achieved a major milestone in the development of 10 kV Silicon Carbide (SiC) devices
SuperGrid Institute has achieved a major milestone in the development of 10 kV Silicon Carbide (SiC) devices such as 5A BJT and 50A PIN diode as part of its work on developing innovative solutions for MV converters. Recent tests revealed outstanding switching performances.
